Authoritative Guide: The Art of Professional Hanging for TeruierMirror Large Wall Mirrors
Engineering Precision for Visual Grandeur

Core Principle: Safety as Aesthetics

“Every hanging of a Teruier Mirror is an elegant performance of architectural mechanics.” — Klaus Reinhardt, European Installation Director

Phase One: Sacred Preparation

(A sacred space demands sacred preparation)

Sanctuary Inspection of the Wall

• Use a detector to scan the wall surface. For drywall, locate the studs; for concrete walls, mark the anchor points.

• Taboo: Hollow bricks or thin partition walls require pre-installed cross-border load-bearing panels (consult Teruier Support Team for solutions).

Decoding the Teruier Mirror Back

• Gently run your fingers along the mirror back:

  • If it features a grid-like reinforcement (Teruier’s patented T-Secure® Backplate), align hanging points with the horizontal metal straps.

  • If it’s a frameless full mirror, use the included titanium alloy hanging clips (engraved with the ☥ brand emblem).

Sanctified Tool Checklist

• Laser level (error margin ≤ 0.5°)

• Hammer drill with diamond-tipped bit (concrete) / fine-threaded bit (studs)

• Teruier custom expansion bolt set (with anti-vibration silicone pads)

• Load calculator app (visit support.teruiermirror.com/load-calc)

Phase Two: Precision Installation Ritual (Like a Watchmaker’s Craft)

▶ STEP 1: Consecration of Space

• Lay Teruier’s anti-scratch velvet mat (deep cobalt blue, the brand’s signature color) on the floor.

• Lean the mirror against the wall at a 45° angle, keeping the protective film on until the moment of hanging.

▶ STEP 2: Imprinting Coordinates

• Cross two laser lines for positioning: horizontal + vertical centerline (calibrate to eye level with two people kneeling for precision).

• Special Note for the Middle East: Avoid hanging directly facing the Qibla direction, respecting cultural sanctity.

▶ STEP 3: Laying the Anchor Sanctuary

# Drilling Depth Formula (Teruier Engineering Standard)
*Bolt length + 15mm = Minimum hole depth*

• After inserting expansion bolts, inject mirror-specific moisture-resistant sealant (choose high-temperature-resistant formula for desert climates).

▶ STEP 4: The Cloud Lift

• Four people, wearing Teruier white gloves, lift the mirror:
  ✓ Fingertips must never touch the mirror surface.
  ✓ Let the mirror’s base touch the wall first, then lower it as gently as a falling feather.
  ✓ Listen for the sacred “click” as the hanging hooks engage.

Final Seal: The Teruier Eternal Bond

(Creating a century-defying masterpiece of light and shadow)

Edge Anointment Ritual

• Apply light-modified silicone sealant (color: CRYSTAL) along the frame, smoothing it with a fingertip at a 7° angle.

Gravity Trial

• Within 48 hours of hanging:

  • Check alignment daily at dawn with a level (thermal expansion period).

  • Place a micro pressure sensor in a discreet bottom location (a gift for Teruier Diamond members).

Coronation of Light

• Clean with ionized water and a suede cloth in an ∞-shaped motion:
  “Let Teruier become the third window of your space.” — Leila Al-Faisal, Light Artist

⚠️ Divine Warning

For mirrors wider than 1.2 meters, Teruier’s anti-shatter film (DiamondShield® Technology) is mandatory—not an option, but a responsibility.

Declaration of Honor: Every Teruier Mirror bears a hidden authentication seal. Shine a UV light on the bottom-right corner to reveal the eagle-wing emblem.

Let Teruier Mirror Become the Soulful Eye of Your Space
Need a master installer? Contact your dedicated Teruier Light Consultant to dispatch a white-glove Gold-certified technician team.

Teruier Mirror: Born in the glass workshops of Germany’s Black Forest, tempered in Dubai’s high-temperature labs.
“When a mirror is hung perfectly, the wall gains life.”

[Note] Before installation, scan the QR code on the mirror frame for 3D holographic guidance or visit: www.teruiermirror.com/

Generally speaking, our order requirements are as follows: the minimum order quantity (MOQ) for large items is 50 pieces, for regular items it is 100 pieces, for small items it is 500 pieces, and for very small items (such as ceramic decorations) the MOQ is 1,000 pieces. Orders exceeding $100,000 will receive a 5% discount. The delivery timeline is determined based on the specific order quantity and production schedule. Typically, we are able to complete delivery within two months.