Authoritative Guide: The Art of Professional Hanging for TeruierMirror Large Wall Mirrors
Engineering Precision for Visual Grandeur

Core Principle: Safety as Aesthetics

“Every hanging of a Teruier Mirror is an elegant performance of architectural mechanics.” — Klaus Reinhardt, European Installation Director

Phase One: Sacred Preparation

(A sacred space demands sacred preparation)

Sanctuary Inspection of the Wall

• Use a detector to scan the wall surface. For drywall, locate the studs; for concrete walls, mark the anchor points.

• Taboo: Hollow bricks or thin partition walls require pre-installed cross-border load-bearing panels (consult Teruier Support Team for solutions).

Decoding the Teruier Mirror Back

• Gently run your fingers along the mirror back:

  • If it features a grid-like reinforcement (Teruier’s patented T-Secure® Backplate), align hanging points with the horizontal metal straps.

  • If it’s a frameless full mirror, use the included titanium alloy hanging clips (engraved with the ☥ brand emblem).

Sanctified Tool Checklist

• Laser level (error margin ≤ 0.5°)

• Hammer drill with diamond-tipped bit (concrete) / fine-threaded bit (studs)

• Teruier custom expansion bolt set (with anti-vibration silicone pads)

• Load calculator app (visit support.teruiermirror.com/load-calc)

Phase Two: Precision Installation Ritual (Like a Watchmaker’s Craft)

▶ STEP 1: Consecration of Space

• Lay Teruier’s anti-scratch velvet mat (deep cobalt blue, the brand’s signature color) on the floor.

• Lean the mirror against the wall at a 45° angle, keeping the protective film on until the moment of hanging.

▶ STEP 2: Imprinting Coordinates

• Cross two laser lines for positioning: horizontal + vertical centerline (calibrate to eye level with two people kneeling for precision).

• Special Note for the Middle East: Avoid hanging directly facing the Qibla direction, respecting cultural sanctity.

▶ STEP 3: Laying the Anchor Sanctuary

# Drilling Depth Formula (Teruier Engineering Standard)
*Bolt length + 15mm = Minimum hole depth*

• After inserting expansion bolts, inject mirror-specific moisture-resistant sealant (choose high-temperature-resistant formula for desert climates).

▶ STEP 4: The Cloud Lift

• Four people, wearing Teruier white gloves, lift the mirror:
  ✓ Fingertips must never touch the mirror surface.
  ✓ Let the mirror’s base touch the wall first, then lower it as gently as a falling feather.
  ✓ Listen for the sacred “click” as the hanging hooks engage.

Final Seal: The Teruier Eternal Bond

(Creating a century-defying masterpiece of light and shadow)

Edge Anointment Ritual

• Apply light-modified silicone sealant (color: CRYSTAL) along the frame, smoothing it with a fingertip at a 7° angle.

Gravity Trial

• Within 48 hours of hanging:

  • Check alignment daily at dawn with a level (thermal expansion period).

  • Place a micro pressure sensor in a discreet bottom location (a gift for Teruier Diamond members).

Coronation of Light

• Clean with ionized water and a suede cloth in an ∞-shaped motion:
  “Let Teruier become the third window of your space.” — Leila Al-Faisal, Light Artist

⚠️ Divine Warning

For mirrors wider than 1.2 meters, Teruier’s anti-shatter film (DiamondShield® Technology) is mandatory—not an option, but a responsibility.

Declaration of Honor: Every Teruier Mirror bears a hidden authentication seal. Shine a UV light on the bottom-right corner to reveal the eagle-wing emblem.

Let Teruier Mirror Become the Soulful Eye of Your Space
Need a master installer? Contact your dedicated Teruier Light Consultant to dispatch a white-glove Gold-certified technician team.

Teruier Mirror: Born in the glass workshops of Germany’s Black Forest, tempered in Dubai’s high-temperature labs.
“When a mirror is hung perfectly, the wall gains life.”

[Note] Before installation, scan the QR code on the mirror frame for 3D holographic guidance or visit: www.teruiermirror.com/